• Frame rails are reproduced from original design and mig and tig welded for superior strength and durability.
• 102" wheel base
• Main rails fabricated from 10 gauge cold finished mild steel
• Cross section of main rails are plasma cut to eliminate warpage and to assure uniformity from rail to rail
• All frame rails are precisely located and predrilled with a custom fixture.
• Frame is cross-braced with K member formed from 10 gauge mild steel
• K member has access for ease of routing exhaust, brake lines and fuel lines.
• Frame rails in front and rear of K member are boxed for added strength and appearance.
• All blind holes in frame rails for attaching body components have nuts welded in place for ease of assembly.
• Front cross member is setup for stock or tubular Mustang II front suspension and is formed from 3/16" cold finished mild steel with all mounting point for upper and lower control arms and rack and pinion steering precisely located with custom fixtures. Front strut mounting brackets are made from 5/16" cold finished mild steel with a 1/4" gusset for added strength (not used with tubular front control arms).
• Rear cross member is constructed from 2" x 2" square tubing with 1 1/4" diameter threaded bar stock for mounting of coilover shocks.