• Frame rails are reproduced from original design and mig and tig welded for superior strength and durability.
• 107" wheel base
• Main rails fabricated from 10 gauge cold finished mild steel
• Cross section of main rail at it’s tallest point is 6" x 1 7/8"
• All frame rails are plasma cut to eliminate warpage and to assure uniformity from rail to rail
• All holes in frame rails are precisely located and predrilled with a custom fixture
• Frame is cross-braced with K member formed from 10 gauge mild steel
• k member is designed for ease of routing exhaust, brake lines and fuel lines
• Frame rails in front and rear of K member are boxed for added strength and appearance
• All blind holes in frame rails for attaching body components have nuts welded in place for ease of assembly
• Front cross member is setup for stock or tubular Mustang II front suspension and is formed from 3/16" cold finished mild steel with all mounting point for upper and lower control arms and rack and pinion steering precisely located with custom fixtures
• Front strut mounting brackets are made from 5/16" cold finished mild steel with a 1/4" gusset for added strength (not used with tubular control arms)Rear cross member is constructed from 2" x 2" square tubing with 1 ¼" diameter threaded bar stock for mounting of coilover shocks