•     Frame rails are reproduced from original design and mig and tig welded for superior strength and durability
•     112” wheel base
•     Main rails fabricated from 10 gauge cold finished mild steel
•     Cross section of main rail at its tallest point is 5 3/4” x 1 7/8”
•     All frame rails are plasma cut to eliminate warpage and to assure uniformity from rail to rail
•     All holes in frame rails are precisely located and predrilled with a custom fixture
•     Frame is cross-braced with K member formed from 10 gauge mild steel.
•     K member is designed for ease of routing exhaust, brake lines and fuel lines
•     Frame rails are boxed for added strength and appearance
•     All blind holes in frame rails for attaching body components have nuts welded in place for ease of assembly
•     Front cross member is setup for stock or tubular Mustang II front suspension and is formed from 3/16” cold finished mild steel with all mounting point for upper and lower control arms and rack and pinion steering precisely located with custom fixtures
•     Front strut mounting brackets are made from 5/16” cold finished mild steel with a 1/4” gusset for added strength
•     Rear cross member is constructed from square tubing with 1¼” diameter threaded bar stock for mounting of coilover shocks